| |
Turbo
Upgrade
 |
|
Greddy |
| T78 single turbo conversion.GReddy Turbo and Turbo
Upgrade kits exclusively use GReddy Spec.Mitsubishi Turbochargers.The kits are
designed and tested to match the best-sized turbo per application.This means
you get good response,smooth driveability, performance that can still be
upgraded and lasting reliability. |
| £3060 |
| T88 single turbo kit |
| £3141 |
|
Buy  |
|
 |
|
HKS |
| TO4R single kit offers unsurpassed performance and
craftsmanship.Consisting of large HKS turbos,precision crafted manifolds,HKS
external wastegates,flanged downpipes,HKS Full Turbo Upgrades offer phenomenal
top end horsepower and a good response. |
| £4325 |
|
| Buy |
|
 |
|
HKS |
| GT2835 Full Turbo Kits offer unsurpassed performance and
craftsmanship.Each kit consists of properly sized signature HKS GT Ball-Bearing
Turbocharger unit(s) that offer both power and response and appropriate related
hardware.The Supra TT kit utilizes GT2835 Turbos,precision crafted S/S
manifolds,HKS external wastegates and flanged downpipes. |
| £5700 |
|
| Buy |
|
 |
|
Powerhouse
Racing |
| Turbo kit for non-turbo MK4 Supra, gives around 380bhp
approx,complete kit with intercooler |
| £3079 |
|
| Buy |
|
 |
|
Powerhouse
Racing |
| Street turbo kit.This is the base-level single turbo system
offered to those customers needing to upgrade or replace factory twin turbos,
but not wanting to go "all the way". Replacing factory twin turbos that fail
can cost upwards of £1000 with used parts and labor.So,the team at PHR
decided to offer an alternative that at the same time would provide slightly
more Horsepower and Torque.The PHR Street Turbo System is designed to be used
with the factory USA/UK spec MAF sensor and fuel system and yields up to 510
RWHP.However, for the best and safest results,PHR recommends upgrading to the
HKS VPC, PHR Fuel Pressure Dampener bypass,and PHR high output fuel pump.This
newly developed turbo system includes a one-piece cast steel exhaust manifold
for reliable and efficient operation, PHR GT60 series turbocharger, external
wastegate, 3" mandrel bent downpipe, intercooler plumbing, air intake pipe,
K&N reusable air filter,and all hardware for a worry-free install.The
Street Turbo downpipe bolts directly to the factory catalytic converters,or to
any aftermarket downpipe. Please specify intercooler brand as our piping is
intercooler-specific.We currently have piping for HKS Type S and Greddy front
mounted intercoolers. |
| £2140 |
|
| Buy |
|
|
|
Powerhouse
Racing |
| Stage 1 turbo kit.Do you want the ultimate street
Supra,or the ultimate road race turbo kit? Look no further, the PHR Stage 1
Single Turbo System is here to fill your needs.The Stage 1 System is designed
to function with the factory fuel system to reduce cost,while maintaining the
ultimate in factory reliability.However,for applications above 500 Horsepower,
the Stage 1 kit can be coupled with the PHR Stage 1 fuel system upgrade for the
ultimate in power and response.Capable of 520 RWHP utilizing the factory fuel
system, or 630 RWHP using the PHR Stage 1 fuel system upgrade, this turbo
system offers full boost by 3800 RPM and a flat torque curve up to RPM
redline.The Stage 1 System retains all of the high quality components of the
Stage 2 System, with a lower price.This kit can also be upgraded to the Stage 2
system when desired, stage 3 turbo kit also available |
| £2705 |
|
| Buy |
|
|
|
Powerhouse
Racing |
| Stage 2 turbo kit. Do you want the ultimate in power and
response? Look no further, this is our most popular single turbo system serving
the needs of drag racers, road racers, and professional race teams throughout
the world! Lots of imitators have tried to copy the features our Stage 2
system, but none have succeeded in obtaining the results or long-term quality
of the PHR Stage 2 Single Turbo Kit. The Stage 2 system was developed to serve
the needs of those wanting the ultimate in response, reliability, and power
output. After years of testing every turbo available to us, we have finally
settled on this particular turbo configuration. The specifications of these
turbos are considered proprietary so please don't ask us details! This very
complete kit includes a fully hand-ported HKS stainless steel 50mm single turbo
header, HKS GT series 60mm wastegate, polished PHR GT62 Series turbocharger, 3"
mandrel bent downpipe with flex section to reduce vibration, 321 stainless
steel wastegate dump tube, 4" air intake piping with reusable K&N air
filter, 3" ceramic coated intercooler piping, 3-ply silicone hose connections,
stainless steel exhaust manifold lock nuts, stainless steel exhaust gaskets,
gasket sealant, teflon paste, AN fittings, PHR billet aluminum oil drain
flanges, teflon braided wastegate and oil lines, water bypass hoses, stainless
steel hose clamps, and all other hardware necessary for a complete install. We
utilize only the finest components available such as stainless steel hardware,
CNC machined aluminum flanges, and Teflon braided lines for reliable oil and
wastegate connections. Expect boost response to be similar to stock twin turbo
system running in twin mode with 4-5 PSI by 2500 RPM and full boost by 3900
RPM. Compare that response to the top-end power supplied by the HKS, RPS, and
Greddy single turbo kits. This kit makes over 650 RWHP at 27 psi and offers a
flat, broad torque range. See the Power Page of this turbo kit fitted to a
Supra with stock engine and cylinder head. This is the same system as fitted to
our fleet of 650 Horsepower daily driven Supras. When everyone else's
off-the-shelf ordinary single turbo kit just won't do, call us with your needs.
PHR offers the highest quality aftermarket turbo conversions available for the
Supra, and stands by our commitment in refusing to sacrifice quality to lower
the cost. When it comes to an investment of this size and importance, trust the
experienced leader! Can also be fully polished and heat coated for additional
under hood appearance. |
| £2895 |
|
| Buy |
|
|
|
Powerhouse Racing |
| Stage 3 turbo kit.
This is the level where the serious horsepower is just beginning! For those who need the ultimate top-end horsepower and torque of the larger T-series ITS turbochargers, the PHR Stage 3 System is for you. The Stage 3 turbocharger (GT72) makes full boost (18 psi) by approximately 4500 RPM, and can make upwards of 700 RWHP at 32 psi. Larger upgraded camshafts such as the HKS 264 duration are recommended at this level. The Stage 3 System includes the original top-quality HKS 50mm stainless steel header, HKS GT 60mm external wastegate, 65mm 321 stainless steel wastegate dump tube, 3” mandrel bent downpipe with V-band connectors, 3” mandrel bent midpipe with V-band connectors, 3” mandrel bent “drop down” intercooler piping, high gloss 3-ply silicone connectors in red, blue, or black, 4” air intake tube, 4” K&N high flow air filter, GT72 turbocharger with polished ITS compressor housing, 10AN stainless steel braided oil drain line, 4AN Teflon stainless steel oil feed line, 4AN Teflon stainless steel wastegate control lines, stainless steel turbocharger gaskets, stainless steel locking exhaust manifold nuts, stainless steel hose clamps, and all hardware for a worry-free install. As an added bonus, the downpipe includes an oxygen sensor flange for the Toyota unit, as well as an 18mm bung for a wideband sensor. The HKS exhaust manifold and all exhaust components are fully Extreme 2000 black heat coated for durability and heat reduction, and all intercooler piping is ceramic coated to reduce thermal conductivity. Also, since all kit components are the same, the Stage 3 System can be upgraded to the Stage 4 or 5 System by simply changing the turbocharger and downpipe if desired. Our famous “drop down” design intercooler piping takes a direct route to the front mount intercooler to reduce turbo lag, therefore, our intercooler piping is specific to each brand. Please specify your brand/model of front mounted intercooler and color of silicone connectors when ordering. This turbo system is available for shipment anywhere in the world |
| £3140 |
|
| Buy |
|
|
|
Powerhouse Racing |
| Stage 4 turbo kit.
For the ultimate in top-end horsepower and torque, coupled with fast response, the Stage 4 System leaves no questions to chance. This is one of the most powerful single turbo systems available for the Supra TT, period. Featuring the venerable dual ball-bearing ITS GT74 turbocharger fitted with a larger Q-trim exhaust wheel, the Stage 4 System can make upwards of 800 RWHP at 32 psi on a mildly upgraded or fully built 2JZGTE engine. At this level, PHR recommends larger upgraded camshafts, a full engine upgrade, and cylinder head porting to accommodate the higher boost levels and airflow requirements of this larger turbocharger. The Stage 4 System includes the original top-quality HKS 50mm stainless steel header, HKS GT 60mm external wastegate, 65mm 321 stainless steel wastegate dump tube, 4” mandrel bent downpipe with V-band connectors and 18mm wideband bung, 4” mandrel bent midpipe with V-band connectors, 3” mandrel bent “drop down” intercooler piping, high gloss 3-ply silicone connectors in red, blue, or black, 4” air intake tube, 4” K&N high flow air filter, GT74 turbocharger with polished ITS compressor housing, 10AN stainless steel braided oil drain line, 4AN Teflon stainless steel oil feed line, 4AN Teflon stainless steel wastegate control lines, stainless steel turbocharger gaskets, stainless steel locking exhaust manifold nuts, stainless steel hose clamps, and all hardware for a worry-free install. The HKS exhaust manifold and all exhaust components are fully Extreme 2000 black heat coated for durability and heat reduction, and all intercooler piping is ceramic coated to reduce thermal conductivity. Also, since all kit components are the same, the Stage 4 System can be upgraded to the Stage 5 System by simply changing the turbocharger if desired. Our famous “drop down” design intercooler piping takes a direct route to the front mount intercooler to reduce turbo lag, therefore, our intercooler piping is specific to each brand. Please specify your brand/model of front mounted intercooler and color of silicone connectors when ordering. This turbo system is available for shipment anywhere in the world. |
| £3595 |
|
| Buy |
|
|
|
Powerhouse Racing |
| Stage 5 turbo kit.
This is the largest single turbo system PHR manufacture for the Supra TT. Featuring the powerful dual ball-bearing ITS GT76 turbocharger fitted with a larger R-series exhaust wheel, the Stage 5 System can make upwards of 900 RWHP at 32 psi on a fully built 2JZGTE engine. PHR recommends larger camshafts, a full engine upgrade, upgraded intake manifold, and cylinder head porting to support this horsepower level. The Stage 5 System includes the original top-quality HKS 50mm stainless steel header, HKS GT 60mm external wastegate, 65mm 321 stainless steel wastegate dump tube, 4” mandrel bent downpipe with V-band connectors and 18mm wideband bung, 4” mandrel bent midpipe with V-band connectors, 3” mandrel bent “drop down” intercooler piping, high gloss 3-ply silicone connectors in red, blue, or black, 4” air intake tube, 4” K&N high flow air filter, GT76 turbocharger with polished ITS compressor housing, 10AN stainless steel braided oil drain line, 4AN Teflon stainless steel oil feed line, 4AN Teflon stainless steel wastegate control lines, stainless steel turbocharger gaskets, stainless steel locking exhaust manifold nuts, stainless steel hose clamps, and all hardware for a worry-free install. The HKS exhaust manifold and all exhaust components are fully Extreme 2000 black heat coated for durability and heat reduction, and all intercooler piping is ceramic coated to reduce thermal conductivity. Our famous “drop down” design intercooler piping takes a direct route to the front mount intercooler to reduce turbo lag, therefore, our intercooler piping is specific to each brand. Please specify your brand/model of front mounted intercooler and color of silicone connectors when ordering. This turbo system is available for shipment anywhere in the world |
| £3580 |
|
| Buy |
|
| |
 |
| |
All prices plus
17.5% VAT and delivery
Some items are
shipped from overseas, please email/call for a quote before ordering
*Prices may vary
slightly due to exchange rate
Fitting service is
available for all the parts listed above
|
|
